2fcbee89

DC 4mA-20mA Signal Conditioner WBT1C1CS03

DC 4mA-20mA Signal Conditioner WBT1C1CS03

WBT1C1CS03 is a standard two-wire DC current conditioner. It uses the principle of photoelectric isolation to convert 4mA~20mA DC signals into 4mA~20mA DC signals. Input and output are isolated. It has the advantages of high isolation, high accuracy, low drift and wide temperature range. This product is mainly used to suppress strong electrical interference and common mode interference during the transmission of sensors and meters. It is especially suitable for use with sensors/transmitters and meters that require electrical isolation. This product can be widely used in computer, PLC and other measurement and control systems and automatic control fields.


Product Detail

Product Tags

Product Description And Application

WBT1C1CS03 is a standard two-wire DC current conditioner. It uses the principle of photoelectric isolation to convert 4mA~20mA DC signals into 4mA~20mA DC signals. Input and output are isolated. It has the advantages of high isolation, high accuracy, low drift and wide temperature range. This product is mainly used to suppress strong electrical interference and common mode interference during the transmission of sensors and meters. It is especially suitable for use with sensors/transmitters and meters that require electrical isolation. This product can be widely used in computer, PLC and other measurement and control systems and automatic control fields.

Specification

Attribute

Value

Input

DC 4mA~20mA

Output

DC 4mA~20mA

Accuracy level

0.2

Equivalent input impedance

about 250Ω

Linear range

0% to 120% of nominal input

Response time

120ms

Overload capability

2 times the nominal input current for 5s

Maximum load capacity

about 500Ω

Auxiliary power supply

24V DC

Static current

30mA

Isolation withstand voltage

between input and output >DC 1kV, 1min

Between power supply and output >DC 1kV, 1min

Between power supply and input >DC 1kV, 1min

Output ripple

<10mV (effective value, output load is 250Ω)

Temperature drift

150 × 10-6 / ° C

Ambient temperature

Commercial grade: 0 ° C ~ 50 ° C

Industrial grade: -25 ° C ~ +70 ° C

Product Dimensional Drawing (unit: mm)

Product Terminal Identification Drawing


  • Previous:
  • Next:

  • Write your message here and send it to us